For the best result, it is important to select the best and most cost effective to fit your purpose. There are four types of these varying in terms their effectiveness, price, and material quality. Check out the main four categories for better understanding and selection:
Dyed Film
This uses the principle of blocking rays of light by placing the dye beside adhesive layer thereby optimizing the tinting film with addition of dye and then applies it to the window. It has been found to be most affordable and economical and as well less operative than the other. This type of window tint film is mainly used for appearance purpose. Tinted Film has flat and opaque appearance with the provision of privacy as well as enhancing interior visibility when applied on automobile windows but appears black. However, the provided heat reduction of dye tint film is very low thereby tends to fade away with time.
This is the most common type of auto film Malaysia and is quite cheap, compared to the other types. It also provides the least functionality, when compared to the other type of tinting film Malaysia. The dye on the tinted film will block the light rays, and this will, somehow, prevent too much heat from getting into the car. In most cases, the dyed tinted film Malaysia is used for decorative purposes. After a while, the dye will start fading, and this leaves the film worthless.
Metallized Film
Metallized tinted film utilizes the small metallic particles to dissipate heat by reflecting away from the interior space just like in the case of dyed tinted film. These particles are very tiny and embedded in it, making it invisible. The metalized tinted film contents give strength to the window in addition to its real function. When metalized tinted film is used on a vehicle window, it also serves the function of shatter-resistant and appears shinning from outside view. It has the advantage of scratch resistance more than dyed tinted film. However, it has the disadvantage of interfering with GPS transmission, cell phone, and radio reception when metallic content is used in a vehicle.
The main objective of the metalized tinted film is it to keep too much heat away from the interior space of your car. This is through reflecting, which is caused by microscopic metallic particles that are embedded to this auto film Malaysia. Most experts also suggest that the metallic tinted film Malaysia tends to strength the car window and makes the glass shutter-resistant. From the outside, the metalized tinted film forms a shiny appearance. The only challenge is that this type of tinted film Malaysia interferes with GPS and phone transmission as well as radio reception.
Carbon Film
This tinted film gives better results in defeating the drawback interference experienced in the metalized tinted film. Your cell phones and radio transmission are not interfered by any metallic content as carbon window tint film produces the best options with its dark and matte-finished properties as it doesn’t have any metallic content in it. The infrared light which causes warmth is blocked by carbon content embedded, up to 40% infrared light which enters through the window is blocked to maintain cooling effect inside space. Carbon window tinting film has been discovered to stand the test of time as it cannot fade with time, unlike dyed. Also, it has many other benefits such as preventing interior upholstery from fading by effectively blocking heat rays and reducing air-conditioner running time and power during winter and summer.
This is one of the best auto film Malaysia options for most car owners. This is darker and will not affect the radio or phone signals. It has a matte finish, which creates an appealing look on your car. Besides blocking heat, it will keep the upholstery in perfect condition and will also keep the car cool inside, eliminating the need to use air conditioning in your car. The carbon tinted film Malaysia does not fade, even when used for a long period of time.
Ceramic Film
Researched and confirmed to be the most active with the best result out of all types of window tint film. It utilized non-metallic and nonconductive ceramic particles to prevent about 45% to 50% solar heat from entering the vehicle through a window in the form of infrared light. It is the most expensive out of the four types with its high quality but cost effective with its worth. Its reliability and efficiency cannot be compared to other window tint films. The ceramic tinted film keeps inside space cool both day and night and as well enhances maximum visibility. In summary, the ceramic tinted film has higher advantage over other tinted films in terms of interference, blocking of ultraviolet light, scratch resistance, fading resistance, Shaffer-proof, maximum visibility, and overall efficiency.
This is the best quality, and this explains why it is so costly. This type of tint does not have any dye, metal or carbon in it, but has ceramic particles. There are said to be effective in blocking the sun rays. Studies show that 99% of the light rays will not enter into the car.
There are a number of accessories that you can add to your car for your comfort as well as enhance the overall appearance. The ways that you can use to make your car interiors look attractive. The main benefit is the fact that it allows you to enjoy privacy, while still getting sufficient light inside your vehicle. There are different types of film, and you consult the experts so that you can find the one that will serve your needs in the best way possible.